Next steps
Follow the procedure listed in
Cooling fan
Remove a cooling fan
Prerequisites
•
Follow the safety guidelines listed in the
•
Follow the procedure listed in the
•
Remove the air
shroud.
•
Move the cables out of way to access the fan cable connector on the system board.
NOTE:
Observe the fan cable routing or make a note on the fan cable routing.
Steps
1. Disconnect the cooling fan cable connected to the system board connector.
2. Holding the blue tab, lift the cooling fan out of the fan cage.
Figure 24. Removing a cooling fan
Next steps
Replace the cooling
fan.
Install a cooling fan
Prerequisites
•
Follow the safety guidelines listed in the
•
Follow the procedure listed in the
Steps
1. Lower the cooling fan into the cage until it is seated firmly.
After working inside your
system.
Safety
instructions.
Before working inside your
Safety
instructions.
Before you work inside your
system.
system.
Installing and removing system components
61