Table of Contents
Advertisement
Figure 71. Installing the LOM filler bracket
Next steps
Install the LOM riser
card.
Install the LOM riser card
Prerequisites
•
Follow the safety guidelines listed in the
•
Follow the procedure listed in the
•
Remove the air
shroud.
•
If installed, remove the risers.
Steps
1. Remove the LOM filler bracket.
a. Using the Phillips #2 screwdriver, remove the screw that secures the bracket to the system.
b. Slide the bracket out of the slot on the system.
Safety
instructions.
Before you work inside your
system.
Installing and removing system components
101
Advertisement
Table of Contents
