Table of Contents
Advertisement
Table 26. HTTP Device n Settings details (continued)
Option
TLS Authentication
Configuration
Table 27. UEFI iSCSI Settings screen details
Option
iSCSI Initiator Name
iSCSI Device1
iSCSI Device1 Settings
Table 28. ISCSI Device1 Settings screen details
Option
Connection 1
Connection 2
Connection 1 Settings
Connection 2 Settings
Connection Order
Integrated devices
To view the Integrated Devices screen, power on the system, press F2, and click System Setup Main Menu > System BIOS >
Integrated Devices.
Table 29. Integrated Devices details
Option
User Accessible USB Ports
Internal USBSD card Port
iDRAC Direct USB Port
Integrated RAID Controller
Embedded NIC1 and NIC2 Embedded NIC1
Description
Specifies the option for TLS authentication configuration.
Description
Specifies the name of the iSCSI initiator in IQN format.
Enables or disables the iSCSI device. When disabled, a UEFI boot option is created for the
iSCSI device automatically. This is set to Disabled by default.
Enables you to control the configuration of the iSCSI device.
Description
Enables or disables the iSCSI connection. This option is set to Disable by default.
Enables or disables the iSCSI connection. This option is set to Disable by default.
Enables you to control the configuration for the iSCSI connection.
Enables you to control the configuration for the iSCSI connection.
Enables you to control the order for which the iSCSI connections will be attempted.
Description
Configures the user accessible USB ports. Selecting Only Back Ports On disables
the front USB ports; selecting All Ports Off disables all front and back USB ports;
selecting All Ports Off (Dynamic) disables all front and back USB ports during
POST. This option is set to All Ports On by default.
When user accessible USB ports is set to All Ports Off (Dynamic) the Enable
Front Ports Only option is enabled.
•
Enable Front Ports Only: Enables or disables the front USB ports during the
operating system runtime.
The USB keyboard and mouse still function in certain USB ports during the boot
process, depending on the selection. After the boot process is complete, the USB
ports will be enabled or disabled as per the setting.
Enables or disables the Internal USBSD card Port. This option is set to On or Off.
This option is set to On by default.
The iDRAC Direct USB port is managed by iDRAC exclusively with no host visibility.
This option is set to ON or OFF. When set to OFF, iDRAC does not detect any USB
devices that are installed in this managed port. This option is set to On by default.
Enables or disables the integrated RAID controller. This option is set to Enabled by
default.
Enables or disables the Embedded NIC1 and NIC2Embedded NIC1 options. If set
to Disabled (OS), the NIC may still be available for shared network access by the
embedded management controller. Configure the Embedded NIC1 and
NIC2Embedded NIC1 option by using the NIC management utilities of the system.
Pre-operating system management applications
41
Advertisement
Table of Contents
