Processor N Details; Sata Settings Details; Port N - Dell EMC XC Core XC6515 Installation And Service Manual

Table 17. Processor Settings details (continued)
Option
Table 18. Processor n details
Option
Family-Model-Stepping
Brand
Level 2 Cache
Level 3 Cache
Number of Cores
Microcode
SATA settings
To view the SATA Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS > SATA
Settings.
Table 19. SATA Settings details
Option
Embedded SATA
Security Freeze Lock
Write Cache

Port n

Description
The following settings are displayed for each processor that is
installed in the system:
Description
Specifies the family, model, and stepping of the processor as
defined by AMD.
Specifies the brand name.
Specifies the total L2 cache.
Specifies the total L3 cache.
Specifies the number of cores per processor.
Specifies the processor microcode version.
Description
Enables the embedded SATA option to be set to Off, AHCI mode , or RAID modes. This
option is set to AHCI Mode by default.
NOTE:
1. You might also have to change the Boot Mode setting to UEFI. Otherwise,
you should set the field to Non-RAID mode.
2. No ESXi and Ubuntu operating system support under RAID mode.
Sends Security Freeze Lock command to the embedded SATA drives during POST. This
option is applicable only for AHCI Mode. This option is set to Enabled by default.
Enables or disables the command for the embedded SATA drives during POST. This option is
set to Disabled by default.
Sets the drive type of the selected device.
For AHCI Mode or RAID Mode, BIOS support is always enabled.
Table 20. Port n
Options
Model
Drive Type
Capacity
Descriptions
Specifies the drive model of the selected
device.
Specifies the type of drive that is attached
to the SATA port.
Specifies the total capacity of the drive.
This field is undefined for removable media
devices such as optical drives.
Pre-operating system management applications 37