Table of Contents
Advertisement
Installing and removing system components
The topics in this section contain the procedures for removing and replacing system components.
Topics:
•
Safety instructions
•
Before you work inside your system
•
After you work inside your system
•
Recommended tools
•
Optional front bezel
•
System cover
•
Drive backplane cover
•
Air shroud
•
Cooling fan
•
Intrusion switch
•
Drives
•
Drive backplane
•
Cable routing
•
System memory
•
Processor and heat sink
•
Expansion cards and expansion card risers
•
MicroSD card
•
M.2 SSD module
•
IDSDM module
•
LOM riser card
•
Mini PERC card
•
System battery
•
Optional internal USB memory key
•
VGA module
•
Power supply unit
•
Power interposer board
•
System board
•
Trusted platform module
•
Control panel
Safety instructions
NOTE:
To avoid injury, do not lift the system on your own, get others to assist you.
WARNING:
Opening or removing the system cover while the system is powered on may expose you to a risk of electric
shock.
CAUTION:
Do not operate the system without the cover for a duration exceeding five minutes. Operating the system
without the system cover can result in component damage.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
CAUTION:
To ensure proper operation and cooling, all bays in the system and system fans must be always populated
with a component or a blank.
52
Installing and removing system components
6
Advertisement
Table of Contents
