Table of Contents
Advertisement
Initial system setup and configuration
This section describes the tasks for initial setup and configuration of the Dell EMC system. The sections provide general steps that you
must complete to set up the system and the reference guides for detailed information.
Topics:
•
Setting up the system
•
iDRAC configuration
•
Resources to install the operating system
Setting up the system
Perform the steps in this procedure to set up the system.
Steps
1. Unpack the system.
2. Install the system into the rack. For more information, see the rail installation and cable management accessory guides relevant to your
rail and cable management solution at www.dell.com/xcseriesmanuals.
3. Connect the peripherals to the system and the system to the electrical outlet.
4. Power on the system by pressing the power button.
For more information about setting up the system, see the Getting Started Guide that is shipped with your system.
iDRAC configuration
The Integrated Dell Remote Access Controller (iDRAC) is designed to make you more productive as a system administrator and improve
the overall availability of Dell EMC servers. iDRAC alerts you to system issues, helps you to perform remote management, and reduces the
need for physical access to the system.
Options to set up the iDRAC IP address
To enable communication between your system and iDRAC, you must first configure the network settings based on your network
infrastructure.
The network settings option is set to DHCP, by default.
NOTE:
For static IP configuration, you must request the setting at the time of purchase.
You can set up the iDRAC IP address using one of the following interfaces. For information about how to set up iDRAC IP address, see the
documentation links provided in the table.
Table 8. Interfaces to set up the iDRAC IP address
Interface
iDRAC Settings utility
Documentation links
Integrated Dell Remote Access Controller User's Guide at
www.dell.com/idracmanuals
or for system specific Integrated Dell
Remote Access Controller User's Guide, go to
poweredgemanuals
> Product Support page of your system >
Manuals & documents.
NOTE:
To determine the most recent iDRAC release for
your platform and for latest documentation version, see
KB article www.dell.com/support/article/sln308699.
Initial system setup and configuration
4
www.dell.com/
29
Advertisement
Table of Contents
