Main Parts - Brother NV4000D Service Manual

Main unit
1
Handle assembly
1. Attach the handle holder R assembly 1 to the inside of the handle 2, and
then attach the retaining ring (E4).
2. Attach the handle holder L assembly 3 to the outside of the handle 2, and
then attach the retaining ring (E4).
2
Handle assembly attachment
1. Attach the handle assembly 1 to the rear of the arm bed with the 4 screws
1.
1
3
Drop cover attachment
1. Place the drop cover 1 onto the tab on the drop knob as shown in the
illustration on the right.
4
Rear cover assembly (Plate A attachment)
1. Attach plate A 1 (2 locations) to the inside of the rear cover with the
screw 1.
*Key point
• Engage the positioning tab on the rear cover with the
positioning hole on plate A.
1
3 - 44

Main parts

Taptite, Bind S
M4X10
Color; Gold
Taptite, Cup B
M4X10
Color; Silver
Torque
·
1.47 – 1.98 N m
Torque
·
0.59 – 0.98 N m
2 Retaining ring E4
3 1
1 1
1
1
1