Brother NV4000D Service Manual page 130

Embroidery
34
E hoop stay plate ASSY disassembly
1. Remove the 2 screws 1, and then remove E hoop presser spring A 1.
2. Remove the screw 1, and then remove E hoop presser spring C 2.
35
E hoop stay plate ASSY disassembly
1. Remove the screw 1, and then remove the E hoop lock lever spring 1.
2. Remove the retaining ring (E4), and then remove the E hoop lock lever 2.
3. Remove the 2 screws 2, and then remove the frame PCB assembly 3 and
the insulation sheet 4.
Start movie clip (CD-ROM version only)
36
XC sub cover removal
1. Remove the screw 1, and then remove the XC sub cover 1.
37
Y pulse motor removal
1. Remove the 2 screws 1, and then remove the Y pulse motor assembly 1.
2 - 108
Main parts
2
1
1
1 1 2
2 3
Retaining ring E4
1
1
1
4
1