Brother NV4000D Service Manual page 34

Main unit
24
Front cover disassembly (card PCB cover assembly removal)
1. Remove the card PCB cover 1.
*Key point
• Remove the hooks (2 locations) from the inside of the front
cover.
25
Front cover disassembly (connector cover removal)
1. Remove the retaining ring (CS4), and then remove the connector cover 1.
26
Front cover disassembly (foot controller jack assembly removal)
1. Use a jack screwdriver to remove the foot controller jack assembly.
2 - 12
Main parts
1
1
Retaining ring CS4