Brother NV4000D Service Manual page 276

Embroidery
16
Cord clip attachment
1. Cord clip 1 to be attached to the right: Hang the FFC cord 2 (folded into
N-shape) over the left guide 3 of the cord clip. Hold this section with the
guide, and attach the cord clip to the hole 4 on the right side the XY
carriage assembly.
*Key point
• Insert the tab on the rear of the cord clip into the hole on the
XY carriage assembly (larger hole), and then slide the cord
clip to the left to secure it.
2. Cord clip 1 to be attached to the left: Hold the FFC cord 2 with the guide
on the cord clip 1, and attach the cord clip to the hole on the left side the
XY carriage assembly.
3 - 144
Main parts
1
2 3
4