Brother NV4000D Service Manual page 111

Modules
3
Side feed gear removal
1. Remove the rubber 1.
2. Remove the screw 1, and then remove the S stopper 2.
3. Slide the S gear 3 to disengage it from the S pulse motor gear 4.
4. Remove the spring
S41
from the side feed plate 5.
5. Pull out the S gear 4 from the side feed plate 3.
Start movie clip (CD-ROM version only)
4
S pulse motor removal
1. Remove the 2 screws 1, and then remove the S pulse motor 1 from the S
pulse motor holder 2.
Side feed module
from the S gear 3, then pull out the S gear 3
2
1 1
6 5
S41
Retaining ring E3
1 2
1 1
4
3
3
2 - 89