Brother NV4000D Service Manual page 119

Embroidery
2
X carriage cover removal
1. Position the embroidery unit assembly with the main unit attachment
section 1 on the left.
2. Remove the screw 1, and then remove the X carriage cover 2.
*Key point
• Remove the screw 1 from the front of the indicated section 3
of the X carriage cover.
• Slide the X carriage cover backward to remove it.
3
E hoop stay cover removal
1. Remove the screws 1, 2, and then remove the E hoop stay cover 1.
Main parts
1 2
3
1
1 1
2
2 - 97