Cloth Pressure Setting Adjustment - Brother NV4000D Service Manual

Adjustment

Cloth pressure setting adjustment

1. Attach J presser foot.
2. Select test mode "02"
3. Turn the pulley by hand until the feed dog is lower than the needle plate.
4. Lower the presser lever, and then press [0] on the screen.
5. Raise the presser lever, and insert a 3 mm gauge.
6. Lower the presser lever, and press [3] on the screen.
7. Remove the 3mm gauge, lower the press lever.
8. Press [OK] of PF AM Adjust
9. Press [CLOSE].
3mm
4 - 21