Brother NV4000D Service Manual page 69

Main unit Needle-presser unit, needle threader unit, upper shaft unit
4
Needle-presser module removal
1
1. Remove the screw 1 on the rear of the module.
2. Remove the 2 screws 2, and then remove presser plate B 1, adjust plate
A 2.
3. Remove the 2 screws 3, and then remove presser plate A 3.
4. Remove the needle-presser module 4.
5. Remove the shaft 5 from the needle-presser module 4.
*Key point
• Refer to "Needle-presser module" on page 2 - 49 for the
disassembly procedure.
Start movie clip (CD-ROM version only)
2 1
2
4 3
5 3
2 - 47