X-Carriage Height Adjustment - Brother NV4000D Service Manual

Adjustment

X-carriage height adjustment

1. Attach the embroidery hoop to the machine and turn the power on.
2. Turn the power off.
3. Remove the embroidery hoop.
4. Loosen the screws securing the embroidery hoop stay plate.
5. Adjust the clearance between the cover and the embroidery hoop stay plate to 3.3 to 3.7 mm at a position 5 mm
from the right edge of the embroidery hoop stay plate.
6. Tighten the screws to secure the embroidery hoop stay plate.
4 - 31