Adjustment
1. Attach N presser foot.
2. Select test mode "03"
3. Press the [Start/Stop] switch.
4. Adjust the correction value to prevent pattern overlapping, opening, and/or shift.
*Key point
• If the pattern is compressed in the
• If the pattern is stretched in the
• If the pattern is compressed in the
• If the pattern is stretched in the
One point adjustment
↕
direction, press the vertical [ + ] button. (A)
↕
direction, press the vertical [ - ] button. (B)
↔
direction, press the horizontal [ + ] button. (C)
↔
direction, press the horizontal [ - ] button. (D)
4 - 25