Brother NV4000D Service Manual page 88

Modules
43
Thread take-up lever link removal
1. Remove the screw 1.
2. Remove the retaining ring (E4).
*Key point
• Move spring
3. Pull out the shaft 1, and then remove spring
lever link 2.
Start movie clip (CD-ROM version only)
44
Shaft bushing assembly removal
1. Remove the 2 screws 1, and then remove the shaft bushing assembly 1.
45
Presser dial gear removal
1. Pull out the presser dial shaft assembly 1.
2. Remove the presser dial gear 2 and the presser foot rack 3.
2 - 66
Needle-presser module
S06
to the thread take-up lever link 2.
S06
and the thread take-up
1
2 1 Retaining ring E4
S06
1 1 1
2 3
1