Brother NV4000D Service Manual page 219

Module
26
Feed bar assembly attachment
1. Apply a small bead of MOLYKOTE EM-30L to the hole on the feed shaft
2 of the feed bar 1.
2. Place the feed bar 3 in the base plate assembly.
3. Apply a small bead of MOLYKOTE EM-30L to feed bar shaft A.
4. Pass feed bar shaft A 4 (both right and left) through the hole on the feed
shaft 2 and the hole on the feed arm 5, and then secure it with the screw
1.
*Key point
• Align the end face of feed bar shaft A with the end face of the
feed arm (both right and left).
Apply MOLYKOTE EM-30L to the hole on the feed
shaft of the feed bar.
Apply MOLYKOTE EM-30L to feed bar shaft A.
Start movie clip (CD-ROM version only)
1
Feed/rotary hook module
Set Screw, Socket (CP)
M4X4
1.18 – 1.57 N
Color; Black
1
Small bead
Small bead
Torque
·
m
2
3
4
1
5
3 - 87