Brother NV4000D Service Manual page 85

Modules
36
Z zigzag lever assembly removal
1. Remove the retaining ring (E3) on the rear of the Z zigzag lever assembly
1, and then remove the zigzag lever assembly 1.
2. Remove the Z lever cap 2 from the Z zigzag lever 1.
*Key point
• Remove the retaining ring (E3) attached to the T cam.
Start movie clip (CD-ROM version only)
37
Thread release lever assembly removal
1. Remove the retaining ring (E3) on the rear of the thread release lever
assembly 1, and then remove the thread release lever assembly 1.
Start movie clip (CD-ROM version only)
Needle-presser module
Retaining ring E3
1 2
Retaining ring E3
1
2 - 63