Modules
1
Thread cutter frame assembly removal
1. Cut the band.
2. Remove the 2 screws 1, then remove the thread cutter frame assembly 1
from the motor holder assembly 2, and then remove the collar.
2
Presser plate assembly removal
1. Remove the screw 1, and then remove the presser plate 1 and the plate
spring 2.
3
Pile (4X8) removal
1. Peel the pile (4X8) from the presser plate 1.
Thread cutter module
1
1
1
2
2
1
1
1
2 - 91