Brother NV4000D Service Manual page 186

Main unit
23
Front cover attachment
1. Connect the panel PCB's two lead wire connectors 1 to the main PCB 2.
2. Attach the front cover with the screws 1 and 2.
*Key point
• Hang the hooks 3 of the front cover (2 locations) over the
base plate.
• Hang the center hook 4 of the front cover over the rear cover.
• Insert the screw 1 to the screw hole on the thread cutter
module via the U-shaped section at the left end of the front
cover.
• Tighten the screw 2 into the screw hole of the adjust plate A.
Start movie clip (CD-ROM version only)
1
2
3 - 54
Main parts
Screw, Pan (T washer)
M3X6
Color; Silver
Screw, Bind
M4X8
Color; Silver
Torque
·
0.57 – 0.78 N m
Torque
·
0.78 – 1.18 N m
2 1
3
1
2
4