Brother NV4000D Service Manual page 284

Embroidery
28
X sensor PCB assembly cord arrangement
1. Slide the X carriage assembly 1 of the main frame assembly to the right as
far as possible.
2. Hang the lead wire of the X sensor PCB assembly 2 over the left hook 3
on the bottom of the main frame, and then tie it with a band.
3. Slide the X carriage assembly 1 of the main frame assembly to the left as
far as possible
4. Hang the lead wire of the X sensor PCB assembly 2 over the right hook
4 on the bottom of the main frame.
29
E cord supporter attachment
1. Attach the E cord support 1 to the X guide plate with the screw 1.
*Key point
• Attach the screw 1 to the hole at the left side of the screw 2.
1
3 - 152
Main parts
Screw, Pan (S/P washer)
M4X8
Color; Silver
Torque
·
0.79 – 0.98 N m
2
3
1 4
2
1
1
1
2