Brother NV4000D Service Manual page 126

Embroidery
21
X pulse motor removal
1. Remove the 2 screws 1, and then remove the X pulse motor assembly 1.
2. Remove the XPM lead wire assembly 2 from the X pulse motor.
22
X tension pulley assembly removal
1. Remove the 2 screws 1, and then remove the tension pulley assembly 1.
2. Remove the timing belt (X belt) 2.
23
X driving gear pulley assembly removal
1. Remove the driving gear pulley assembly 1.
*Key point
• Disengage the hook at the upper section of the driving gear
pulley assembly.
Start movie clip (CD-ROM version only)
2 - 104
Main parts
1
2
1
1 2
1
1