Brother NV4000D Service Manual page 127

Embroidery
24
X guide shaft presser removal
1. Remove the X guide shaft presser 1.
2. Remove the 2 screws 1, and then remove the X guide shaft presser plate
2.
25
X slider removal
1. Disconnect the 3 cords hanging over the guide on the X slider 1.
2. Remove the 2 screws 1, and then remove the X slider 1.
3. Remove the 3 cords fro the groove on the X slider 1.
26
Cord grip removal
1. Remove the screw 1, and then remove the cord grip 1.
2. Remove the 3 cords from the cord grip 1.
Main parts
1 2
1
1
1
1
1
1
2 - 105