Brother NV4000D Service Manual page 48

Main unit
5
AT INIT PCB assembly removal
1. Remove the screw 1, and then remove the AT INIT PCB assembly 1.
6
AT INIT PCB ASSY disassembly
1. Remove the screw 1, and then remove the AT INIT PCB assembly 1
from the AT pulse motor sensor holder 2.
7
Thread guide base removal
1. Remove the 3 screws 1, and then remove the thread guide base 1.
Start movie clip (CD-ROM version only)
8
Thread hook removal
1. Remove the thread hook slider 1 and thread hook 2.
2 - 26
Thread tension unit
1 1
1
1 2
1
1
1 2