Brother NV4000D Service Manual page 33

Main unit
23
Front cover disassembly (board case assembly removal)
1. Remove the ferrite core 1 inserted under the clip held by the right screw
1.
2. Remove the 4 screws 1, and then remove the upper board case assembly
2.
3. Remove the 5 screws 2, and then remove the 5 board pressers.
4. Disconnect the LCD holder assembly lead wire connector 3 and FFC cord
connector 4, and then remove the panel PCB 5 and the lower board case
assembly 6.
5. Remove the screw 3, and then remove the upper ground plate 7 from the
upper board case 8.
6. Remove the screw 3, and then remove the lower ground plate 9 from the
lower board case @.
Main parts
1
2 1
2 3 3 6 2
5 4
8
7
:
9 3
3
2 - 11