Modules
42
Presser bar removal
1. Remove the screw 1 from the presser bar clamp assembly 1, and then
pull the presser bar upward.
2. Remove the presser bar clamp assembly 1 and spring
3. Remove the retaining ring (E5) from the presser bar.
4. Remove the screw 2, and then remove the plate spring 2 and the presser
bar bushing 3.
Start movie clip (CD-ROM version only)
Needle-presser module
S60
Retaining ring E5
.
S60
1
1
2
2
3
2 - 65