Set The Current Time - Datascope Accutorr Plus Service Manual

7.7.2

Set the Current Time

1. Press and hold the Timer/Temp key for 3
seconds. The hour digit only displays.
2. Press the Up or Down Arrow key to change
the number.
3. Press the Timer/Temp key to activate the
minute display.
NOTE: The Accutorr Plus always displays
time in a 24 hour format.
4. Press the Up or Down Arrow key (12 or 13)
to change the number. Continue pressing
the Timer/Temp key and the Arrow keys to
set the month, day, and year (in that order).
Accutorr Plus Service Manual
Chapter 7 - Calibration
Hour
Display
TIMER/TEMP
Press and hold
INTERVAL ELAP . TIME TEMP
to enter the clock
ALARMS
set mode. Set hour,
SET
MUTE
ALARMS then press again to
set the minute.
Press to Change
Figure 7-3 - Hour Display
Minute
Display
TIMER/TEMP
After the time
INTERVAL ELAP . TIME TEMP
and date have
ALARMS
been set, press
SET
MUTE to exit the clock
ALARMS
set mode.
Press to Change
Figure 7-4 - Minute Display
Revised 03/25/02
7-19