Establishing A Connection Via Activesync; Connection Procedure Using A Usb Cable - Pro-face PS-3600G Series User Manual

5.3 Establishing a Connection via ActiveSync

To transfer a program from the personal computer for developing applications to the PS-G unit and then
debug the program while it is running on the PS-G unit, use ActiveSync to establish the connection between
the personal computer and the PS-G unit.
It is required that ActiveSync be installed on the personal computer for developing applications in advance.
To establish the connection, you can use either a USB cable (recommended) or a serial cable.
In either case, simultaneously using an Ethernet cable to download data significantly shortens the download
time.
Once the connection is established, it will also be possible to establish subsequent connections by using the
Ethernet cable only.
5.3.1

Connection Procedure Using a USB Cable

Establish the connection using a USB cable (FP-US00 or commercially available cable).
(1) To open the PS-G unit's Control Panel, click the [Start] button and then point to the [Settings]. From the
menu that appears, click the [Control Panel].
(2) Double click the [PC Connection] to open the [PC Connection Properties] screen.
(3) Select [Desctop@USB] for the method to connect a personal computer.
(4) Click the [OK] to decide each setting.
(5) Turn on the power to the PS-G unit and then connect the personal computer for developing applications
with the PS-G unit using a USB cable. The ActiveSync connection starts.
Chapter 5 Development of Software
5-9