Pro-face PS-3600G Series User Manual page 38

Installing the PS-G
(1) Insert the PS-G into the panel cut, as
shown.
(2) Insert the installation fasteners into
the PS-G insertion slots, at the top and bot-
tom of the unit. (total: 4 slots)
• Insert each installation
fastener securely into the
slot's recess (shaded area).
•
(3) Insert each of the fasteners shown below.
Be sure to pull the fastener back until it is
flush with the rear of the attachment hole.
Chapter 3 Hardware Installation
Slots
Installation Panel
Hook
3-5