Table of Contents
Advertisement
2.3.4 CF Card Interface
GP-4401T is not equipped with a CF card slot. But a SD card slot and a USB
interface are installed in it. In order to use the GP/ST-3400 series data saved in the
CF card and the functions using the CF card, use a SD card or a USB flash drive
instead.
* When using a SD card with GP-4401T, please verify it supports the following
specifications:
SD
SDHC
When the setting of the output destination folder is set to "CF Card" on GP-Pro EX,
if the display unit type is changed, the setting will be automatically changed to the
one that uses a SD card.
To change the setting of the output destination folder, see
setting of the external media to
2.4 Peripheral units and options
2.4.1 Barcode reader connection
Like GP/ST-3400 series, GP-4401T allows you to connect a barcode reader on its
USB interface (Type A) or its serial interface. For GP-4401T, however, a barcode
reader cannot be connected to its serial interface.
For the models GP-4401T supports, see [OtasukePro!]
(http://www.pro-face.com/otasuke/qa/3000/0056_connect_e.html).
2.4.2 Printer connection
Like GP/ST-3400 series, GP-4401T allows you to connect a printer on its USB
interface (Type A).
For the models GP-4401T supports, see [OtasukePro!]
(http://www.pro-face.com/otasuke/qa/3000/0056_connect_e.html).
File format
FAT16
FAT32
use].
11/40
Maximum capacity
2GB
32GB
[5.1 Changing the
Advertisement
Table of Contents
