Peripheral Units And Option Units; Barcode Reader Connectoin; Printer Connection; Expansion Unit - Pro-face GP3000 Series Replacement Manualbook

2.8 Peripheral units and option units

2.8.1 Barcode reader connectoin

GP-4301TM allows you to connect a barcode reader on its USB interface (Type A) in
the same as GP/ST3000 series.
For the models GP-4301TM supports, see [OtasukePro!]
(http://www.pro-face.com/otasuke/qa/3000/0056_connect_e.html).
And if you connect a barcode reader to GP-4301TM, be sure to supply power to the
barcode reader from an external power source (such as a USB hub supporting
self-power supply). When no power is supplied from an external power source, if the
barcode reader consumes more electricity than expected, operation of GP-4301TM
will become unstable and reset may be activated.

2.8.2 Printer connection

GP-4301TM does not support printer connection. A printer for GP/ST3000 series
cannot be used.

2.8.3 Expansion Unit

GP-4301TM is not equipped with an expansion bus unit. The expansion units (such
as CC-LINK) used for GP/ST3000 series cannot be used.

2.8.4 Isolation Unit

The isolation unit for GP/ST3000 series (CA3-ISO232-01, CA3-ISO485-01) cannot
be used for GP-4301TM.
16/40
H