Auxiliary I/O Interface (Aux); Sound Output Interface; Cf Card Interface; Peripheral Units And Options - Pro-face GP-2500 Series Replacement Manualbook

2.6

.2 Auxiliary I/O Interface (AUX)

GP-4000 series is not equipped with Auxiliary I/O Feature. External Reset Input
and 3 Outputs (RUN Output, System Alarm Output, and External Buzzer Output)
that can be used for GP-2401T cannot be used.
2.6 .3 Sound Output Interface (for GP2500S/L only)
GP4000 series is not equipped with the sound output function. The sound output
function for GP2000 series cannot be used.
2.6

.4 CF Card Interface

GP4000 series is not equipped with a CF card slot. But a SD card slot (except
GP-4301TW) and a USB interface are installed. In order to use the GP2000 series
data saved in the CF card and the functions using the CF card, use a SD card or a
USB flash drive instead.
For the GP-PRO/PBIII's 'CF Card output folder' setting, if project data is converted
on GP-Pro EX, the setting will automatically change to the one that uses a SD card.
To change the setting of the output destination folder, see [Changing the setting of
the external media to

2.7 Peripheral units and options

2.7

.1 Barcode reader connection

GP4000 series is not equipped with a tool port. A barcode reader that used to be
connected to the tool port on GP2000 series cannot be used. However, GP4000
series allows you to connect a barcode reader on its USB interface (Type A).
For the models GP4000 series supports, see [OtasukePro!]
(http://www.pro-face.com/otasuke/).
2.7.2 Pinrter Connection
GP4000 series is not equipped with Centronics (parallel) Interface for a printer
though GP2000 series is equipped with it. If the printer for GP2000 series is used
for GP4000 series, a converter that converts USB I/F on GP4000 series to
Centronics I/F is required. And GP4000 series allows you to connect a printer on its
USB port.
For the models GP4000 series supports, see [OtasukePro!]
(http://www.pro-face.com/otasuke/).
use].
22/61