Pro-face PS-3600G Series User Manual page 80

(4) Select the connection method with the personal computer if needed.
(5) Click the [OK] to decide each setting.
(6) Save the settings by the [Save Registry] on Control Panel.
(7) Click the [Start], and then click the [Run]. Then input "repllog.exe" in the [Run] dialogbox.
(8) Start up the ActiveSync on the personal computer for developing applications. Select the [Connection]
from the [File] menu, and then select the port connecting the data transfer cable.
(9) Click the [next] on the dialogbox, and click immediately the [OK] of [Run] dialogbox on the PS-G unit
for starting up "repllog.exe".
If the connection between the PS-G unit and the personal computer for developing applications is not
established, the following dialogbox is popup. Please retry the procedures (7) and (8).
Chapter 5 Development of Software
5-11