5.3.3
Connection Procedure Using the Ethernet Cable Only
Once a connection between the personal computer for developing applications and the PS-G unit is
established with ActiveSync using a USB cable or serial cable, it will be possible to establish the connection
by using only the Ethernet cable until the PS-G unit is turned OFF. By saving the [PC Connection] setting by
selecting Save Registry before turning OFF the PS-G unit, the connection can also be established by using
only the Ethernet cable even after the PS-G unit is restarted.
(1) Connect once with the USB cable or the serial cabal, then establish a partner.
SEE
5.3.1 Connection Procedure Using a USB Cable (page5-9)
5.3.2 Connection Procedure Using a Serial Cable (page5-10)
(2) Execute the [Save the registry] in this unit, and then save the settings.
SEE
4.4.4 Save Registry (page4-10)
(3) When making subsequent connections, click the [Start] button with the Ethernet cable connected and
then click [Run].
In the [Run] dialogbox, type in "repllog.exe /remote" to run the program.
(4) Select [Network Connection] for the connection method and specify the destination personal computer.
Click [Connect] to start the connection.
When the network connection is connected properly, the connection with the ActiveSync is established.
Chapter 5 Development of Software
5-13