PS-3600G Series User Manual
Set Up Procedure
(1) Double click the [RAS Control] icon on the Control Panel.
(2) Select the [Watchdog Timer] tab to enable or disable Watchdog Timer settings. If you select Enable you
will also have to set the timer period (1 sec. to 13 sec.) and specify the actions required after a timeout.
(3) On the [DIN 0] through [DIN 3] tabs, determine whether to enable or disable the general purpose signal
input 0, 1, 2, and 3. If you enable general purpose signal input you will also have to specify the actions
performed when a general purpose signal is received.
(4) Select the [Backlight] tab to enable or disable Backlight Burnout Detection. If you select Enable you
will also have to specify the actions when the Backlight burnout is detected.
(5) Select the [Remote Reset] tab to enable or disable Remote Reset Input.
4-14