Pro-face PS-3600G Series User Manual page 117

PS-3600G Series User Manual
Processing Functions
The PS-G unit provides system condition information via the following items.
LED indicator
In addition to indicating if the unit's power is ON or OFF, the 3-state LED indicator (power lamp) provides
the following system condition information.
Color
Green (lit)
Orange (lit)
Red (lit)
Green (blinking)
Pop-up Message Output
This feature uses the Windows system's pop-up message feature to indicate that an alarm has occurred. Use
the Control Panel's RAS Control or an API-DLL to enable or disable this feature.
Buzzer Output
This feature uses the PS-G unit's internal speaker to indicate the system's condition.
Use the Control Panel's RAS Control or an API-DLL to enable or disable this feature.
System Reset
Reboots the PS-G unit's OS.
Use the Control Panel's RAS Control or an API-DLL to enable or disable this feature.
Disabling the input device operation
This setting either enables or disables signals from input devices (touch panel, keyboard, mouse). If set to
"Disable", input signals from designated devices will not be accepted when a backlight burnout is detected.
This helps to prevent accidental operation of the PS-G unit. The factory setting is for all input devices to be
enabled when a backlight burnout occurs (Checkbox OFF).
• Certain types of backlight failures may not be able to be detected. This is because backlight
burnout is detected by monitoring the PS-G unit's power consumption.
A-6
System Condition
Normal operation
(Power ON)
Indicates the RAS function
System error
When accessing CF Card
Output Requirement
-
LED must be enabled at RAS
Control.
-
-