Peripheral Units And Option Units; Barcode Reader Connection; Printer Connection; Expansion Unit - Pro-face GP-377RT Replacement Manualbook

* When using a SD card with
specifications:
SD
SDHC
For the GP-PRO/PBIII's "CF Card output folder" setting, if project file is converted
on GP-Pro EX, the setting will automatically change to the one that uses a SD card.
To change the setting of the output destination folder, see
setting of the external media to

2.6 Peripheral units and option units

1 Barcode reader connection

2.6.1
GP-4501T/TW is not equipped with a tool port. A barcode reader that used to be
connected to the tool port on GP-577RT/S cannot be used. However, GP-4501T/TW
allows you to connect a barcode reader on its USB interface (Type A) or its serial
interface.
For the models GP-4501T/TW supports, see [OtasukePro!]
(http://www.pro-face.com/otasuke/qa/3000/0056_connect_e.html).

Printer connection

2.6.2
(only when using GP-377R and "Multi-Unit E" (
GP4000 series is not equipped with Centronics (parallel) Interface for a printer
though Multi-unit E (
is used for GP4000 series, a converter that converts USB I/Fon GP4000 series to
Centronics I/F is required. And GP4000 series allows you to connect a printer on its
USB port.
For the models GP4000 series supports, see [OtasukePro!]
(http://www.pro-face.com/otasuke/qa/3000/0056_connect_e.html).

Expansion Unit

2.6.3
GP4000 series is not equipped with an expansion unit interface. The expansion unit
(each kind of unit like CC-LINK Unit) for

Front Maintenance Unit

2.6.4
The front maintenance unit for GP-377R (GP077-CFFM10) cannot be used for
GP4000 series.

Isolation Unit

2.6.5
The isolation unit for
CA2-ISOALL422-01) cannot be used for GP4000 series. You can use the RS-232C
isolation unit for GP4000 series (CA3-ISO232-01) instead.
, please verify it supports the following
GP-4301T
File format
FAT16
FAT32
use].
is equipped with it. If the printer for
GP377R-MLTE11)
GP-377R/377S/377L
12/44
Maximum capacity
2GB
32GB
GP377R-MLTE11
GP-377R/377S/377L
(CA2-ISOALL232-01,
[5.1 Changing the
))
GP-377R
cannot be used.