Pro-face PS-4700 Series User Manual
  1. Manuals
  2. Brands
  3. Pro-face Manuals
  4. Touch Panel
  5. PS-4700 Series
  6. User manual

Pro-face PS-4700 Series User Manual

Atom z510 pre-installed model
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PS-4700 Series
User Manual
(Atom Z510 Pre-installed Model)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PS-4700 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Pro-face PS-4700 Series

Summary of Contents for Pro-face PS-4700 Series

  • Page 1 PS-4700 Series User Manual (Atom Z510 Pre-installed Model)
  • Page 2 Neither Pro-face nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.

  • Page 3: Table Of Contents

    PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Table of Contents Safety Information ......
  • Page 4 Table of Contents Chapter 9 System Monitor ....... . . System Monitor Interface .

  • Page 5: Safety Information

    PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Safety Information § Important Information NOTICE Read these instructions carefully, and look at the equipment to become familiar with the device before trying to install, operate, or maintain it. The following special...
  • Page 6 PLEASE NOTE Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Pro-face for any consequences arising out of the use of this material. A qualified person is one who has skills and knowledge related to the construction and operation of electrical equipment and its installation, and has received safety training to recognize and avoid the hazards involved.

  • Page 7: About The Book

    PS-4700 Series (Atom Z510 Pre-installed Model) User Manual About the Book At a Glance Thank you for purchasing Pro-face's PS-4700 Series (Atom Z510 Pre-installed Model) (Hereafter referred to as the "Industrial Personal Computer"). Document Scope Character Number 5 6 7 8 9 10 11 12 13 14 15 16 17 18...
  • Page 8 About the Book Validity Note This documentation is valid for PS-4700 Series (Atom Z510 Pre-installed Model). The technical characteristics of the device(s) described in this manual appear online. To access this information online, please go to our site http://www.pro- face.com/otasuke/ The characteristics presented in this manual should be constantly improved for clarity and accuracy.
  • Page 9 You can download these technical publications and other technical information from our website "Otasuke Pro!" at http://www.pro-face.com/otasuke/. Global Code A global code is assigned to every Pro-face product as a universal reference. For more information on product models and their matching global codes, please refer to the following URL.
  • Page 10 About the Book Product Related Information Industrial Personal Computers are certified for use in Class I, Division 2 hazardous locations as defined in ANSI/ISA 12.12.01 or CSA C22.2 N213. Observe the following: DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH Remove all power from the device before removing any covers or elements of ...
  • Page 11 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual WARNING UNINTENDED EQUIPMENT OPERATION Use only the software provided with this product. If you use the other software, please confirm the operation and safety before you use. Failure to follow these instructions can result in death, serious injury, or...
  • Page 12 About the Book...

  • Page 13: Part I General Overview

    Magelis Industrial Personal Computer General Overview EIO0000000970 07/2011 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual General Overview Subject of this Part This part provides an overview of Industrial Personal Computer. What's in this Part? This part contains the following chapters:...
  • Page 14 General Overview...

  • Page 15: Chapter 1 Important Information

    Magelis Industrial Personal Computer Important Information EIO0000000970 07/2011 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Important Information General This chapter describes the safety aspects which are specific to the operation of the Industrial Personal Computer. What's in this Chapter?

  • Page 16: Federal Communications Commission Radio Frequency Interference Statement - For U.s.a

    Important Information Federal Communications Commission Radio Frequency Interference Statement - For U.S.A. FCC Radio Interference Information This equipment has been tested and found to comply with the Federal Communications Commission (FCC) limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

  • Page 17: Qualified Personnel

    PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Qualified Personnel General Only qualified personnel can install, operate, and maintain the product. A qualified person is one who has skills and knowledge related to the construction, operation, and installation of electrical equipment, and has received safety training to recognize and avoid the hazards involved.

  • Page 18: Certifications And Standards

    Important Information Certifications and Standards Agency Certifications Pro-face submitted this product for independent testing and qualification by third- party agencies. These agencies have certified this product as meeting the following standards. Underwriters Laboratories Inc., UL 508 and CSA C22.2 N142, Industrial Control ...
  • Page 19 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual End of Life (WEEE) The product contains electronic boards. It must be disposed of in specific treatment channels. The product contains cells and/or storage batteries which must be collected and processed separately, when they have run out and on product end of life.

  • Page 20: European (Ce) Compliance

    Important Information European (CE) Compliance CE Compliance Note The products described in this manual comply with the European Directives concerning Electromagnetic Compatibility and Low Voltage (CE marking) when used as specified in the relevant documentation, in applications for which they are specifically intended, and in connection with approved third-party products.

  • Page 21: Hazardous Location Installations - For Usa And Canada

    ANSI/ISA 12.12.01 or CSA C22.2 N213 certification appears on the product labeling. Do not install any Pro-face or OEM components, equipment, or accessories  unless these have also been qualified as suitable for use in Class I, Division 2, Groups A, B, C, and D locations.
  • Page 22 Important Information DANGER EXPLOSION HAZARD Always confirm the ANSI/ISA 12.12.01 and CSA C22.2 N213 hazardous  location rating of your device before installing or using it in a hazardous location. To power on or power off a Industrial Personal Computer installed in a Class I, ...
  • Page 23 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Power Switch DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH Remove all power from the device before removing any covers or elements of  the system, and prior to installing or removing any accessories, hardware, or cables.
  • Page 24 Important Information Division 2 hazardous location regulations require that all cable connections be provided with adequate strain relief and positive interlock. Use only non-incendive USB devices as USB connections do not provide adequate strain relief to allow the use of the Industrial Personal Computer’s USB connections (see page 61). Never connect or disconnect a cable while power is applied at either end of the cable.

  • Page 25: Hazardous Location Installations - For Atex

    PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Hazardous Location Installations - For ATEX The assembled units with an enclosure should be marked: II 3GD Ex nA IIA Gc Ex tc IIIA T92C Dc 　　　　 Tamb: 0C to +50C DANGER...

  • Page 26: Marine Installations - For Germanischer Lloyd (Gl)

    Important Information Marine Installations - For Germanischer Lloyd (GL) The Atom Z510 Pre-installed Model (except for Stainless Steel Bezel Model) is GL certified only when connected to a Noise Filter for Marine Certification.

  • Page 27: Chapter 2 Physical Overview

    Magelis Industrial Personal Computer Physical Overview EIO0000000970 07/2011 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Physical Overview Subject of this Chapter This chapter provides a physical overview of the Industrial Personal Computer. What’s in this Chapter? This chapter contains the following topics:...

  • Page 28: Package Contents

    Physical Overview Package Contents Items The following items are included in the package of the Industrial Personal Computer. Before using the Industrial Personal Computer, please confirm that all items listed here are present: Industrial Personal Computer: 1 Installation Fasteners: 14 per set for 15" Industrial Personal ...
  • Page 29 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual This Industrial Personal Computer has been carefully packed, with special attention to quality. However, should you find anything damaged or missing, contact your local distributor immediately.

  • Page 30: Industrial Personal Computer 15" Description

    Physical Overview Industrial Personal Computer 15" Description Introduction During operation, surface temperatures of the rear metal housing may reach 70 C (158 F). WARNING RISK OF BURN Do not touch the surface of the rear metal housing during operation. Failure to follow the instruction can result in death, serious injury, or equip- ment damage.
  • Page 31 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Rear View Industrial Personal Computer cover Mode/Node Switch Battery Power button Reset button Compact Flash slot CF1/Connection via IDE-PATA SD Memory card slot Status LEDs (page. 32) Cable clamps (7) *1 Use with the system. Always use at factory default settings.

  • Page 32: Industrial Personal Computer Led Description

    Physical Overview Industrial Personal Computer LED Description LED Description The following figure shows the LEDs on the Industrial Personal Computer: [Power] LED [CF] LED [RUN] (Not supported) [Link] (Not supported) Status LED The following table describes the meaning of the status LEDs on the Industrial Personal Computer: Color State...

  • Page 33: Chapter 3 Characteristics

    Magelis Industrial Personal Computer Characteristics EIO0000000970 07/2011 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Characteristics Subject of this Chapter This chapter lists the product characteristics. What’s in this Chapter? This chapter contains the following topics: Topic Page Industrial Personal Computer Characteristics...

  • Page 34: Industrial Personal Computer Characteristics

    Characteristics Industrial Personal Computer Characteristics Product Characteristics Element Characteristics Processor AtomZ510 1.1 GHz 512 KB L2 cache Intel Chipset Intel(R) System Controller Hub US15W Cooling Method Passive heat sink, Fanless operation DDR2 400 MHz SO-DIMM 1 slot 1 GB to 2 GB max (Unable to be added by Users.) Graphics Controller...
  • Page 35 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual DC Power Supply Element Characteristics Rated Voltage 24 Vdc ±25 % Power Consumption 36 W (max.) Rated Current 1,500 mA max. Typically 3 A, max. 50 A < 300 s Inrush Current Operating Systems ®...
  • Page 36 Characteristics The List of OS Pre-installed Languages for Multi-language ® Windows Embedded Standard 2009 Arabic  Bulgarian — Chinese(Simplified)  Chinese(Traditional)  Croatian — Czech  Danish  Dutch  English  Estonian — Finnish  French  German  Greek ...

  • Page 37: Industrial Personal Computer Interface Characteristics

    PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Industrial Personal Computer Interface Characteristics Serial Interface Element Characteristics Amount Type RS-232C, modem-capable, not electrically isolated UART 16550-compatible, 16-byte FIFO Transfer Rate Maximum 115 kBit/s Connection D-Sub 9-pin, plug (see page 63)

  • Page 38: Environmental Characteristics

    Characteristics Environmental Characteristics Characteristics Characteristics Value Standards Degree of Protection IP65 EN/IEC 61131-2 Pollution Degree For use in Pollution Degree 2 environment EN/IEC 61131-2 0...50 C (32...122 F) Surrounding Air Temperature EN/IEC 61131-2, UL 508 during Operation – 20...60 C (– 4...140 F) Storage Temperature IEC 60068-2-2 tests Bb and Ab, IEC 60068-2-14 tests Na and...

  • Page 39: Chapter 4 Dimensions/Assembly

    Magelis Industrial Personal Computer Dimensions/Assembly EIO0000000970 07/2011 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Dimensions/Assembly Subject of this Chapter This chapter describes Industrial Personal Computer dimensions and installation panels. What’s in this Chapter? This chapter contains the following topics:...

  • Page 40: Industrial Personal Computer 15" Dimensions

    Dimensions/Assembly Industrial Personal Computer 15" Dimensions NOTE: All dimensions shown in the outline diagrams are the same dimensions as the Stainless Steel Bezel Model. Overview The illustration below shows the dimensions of the Industrial Personal Computer 15": NOTE: No front USB for Stainless Steel Bezel Model. Values The following table shows the general tolerances for Industrial Personal Computer dimensions:...

  • Page 41: Installation Requirements

    PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Installation Requirements Important Mounting Information Overheating can cause incorrect software behavior, therefore: Ensure that environmental characteristics (see page 38) are respected.  The Industrial Personal Computer is only permitted for operation in closed rooms.
  • Page 42 Dimensions/Assembly Spacing Requirements In order to provide sufficient air circulation, mount the Industrial Personal Computer so that the spacing is as follows: Side View Rear View x1 > 100 mm (> 3.93 in.) x2 > 50 mm (> 1.96 in.) x3 >...
  • Page 43 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual The dimensions of the opening for installing the Industrial Personal Computer are shown below: Installation panel Industrial Personal Computer Cut- 15" 383.5 + 1/– 0 mm 282.5 + 1/– 0 mm 1.6...10 mm (15.10 + 0.04/–...
  • Page 44 Dimensions/Assembly NOTE: Ensure the thickness of the installation panel is from  1.6 to 10 mm (0.06 to 0.39 in.). All installation panel surfaces used should be strengthened. Due consideration  should be given to the weight of the Industrial Personal Computer, especially if high levels of vibration are expected and the installation panel can move.

  • Page 45: Industrial Personal Computer Installation

    PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Industrial Personal Computer Installation Vibration and Shocks Extra care should be taken with respect to vibration levels when installing or moving the Industrial Personal Computer. If the Industrial Personal Computer is moved, for example, while it is installed in a rack equipped with caster wheels, it can receive excessive shock and vibration.
  • Page 46 Dimensions/Assembly Installing the Industrial Personal Computer Unit The installation gasket and installation fasteners are required when installing the Industrial Personal Computer. Follow the steps shown below when installing the Industrial Personal Computer: Step Action Check that the gasket is correctly attached to the Industrial Personal Computer. NOTE: When checking the gasket, avoid contact with the sharp edges of the Industrial Personal Computer frame, and insert it completely into its groove.
  • Page 47 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual CAUTION OVERTORQUE AND LOOSE HARDWARE Do not exert more than 0.5 N•m (4.5 lb-in) of torque when tightening the  installation fastener, enclosure, accessory, or terminal block screws. Tightening the screws with excessive force can damage the plastic casing of the Industrial Personal Computer.
  • Page 48 Dimensions/Assembly...

  • Page 49: Part Ii Implementation

    Magelis Industrial Personal Computer Implementation EIO0000000970 07/2011 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Implementation Subject of this Part This part describes setting up the product. What’s in this Part? This part contains the following chapters: Chapter Chapter Name...
  • Page 50 Implementation...

  • Page 51: Chapter 5 Getting Started

    Magelis Industrial Personal Computer Getting Started EIO0000000970 07/2011 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Getting Started First Power-up License Agreement ® NOTE: Limitations on your usage of the Windows Operating System are noted in Microsoft's End User License Agreement (EULA). Please read this document before first powering-up.
  • Page 52 Getting Started Enabling/Disabling the EWF Manager The status of the EWF Manager may be changed by running the ChangeEWFstate.exe program located in the C:\Utility\Change EWF State directory. After running this program, you need to restart the system for the change to take effect. You need administrator privileges to enable and disable the EWF Manager.

  • Page 53: Chapter 6 Industrial Personal Computer Connections

    Magelis Industrial Personal Computer Industrial Personal Computer Connections EIO0000000970 07/2011 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Industrial Personal Computer Connections Subject of this Chapter This chapter describes the connection of the Industrial Personal Computer to the main power supply. It also describes the USB ports and identifies the serial interface pin assignment.

  • Page 54: Grounding

    Industrial Personal Computer Connections Grounding Overview The grounding resistance between the Industrial Personal Computer ground and the ground must be 100  or less. When using a long grounding wire, check the resistance and, if required, replace a thin wire with a thicker wire and place it in a duct.
  • Page 55 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Shared Ground Allowed If a dedicated ground is not possible, use a shared ground, as shown below: Industrial Personal Computer Shared Ground not Allowed Do not connect the Industrial Personal Computer to ground through other devices...
  • Page 56 Industrial Personal Computer Connections Ground connection screw (protective earth screw for AC Industrial Personal Computer) Supply voltage Grounding strip Switching cabinet When grounding, follow the procedure below: Step Action Check that the grounding resistance is 100  or less. When connecting the SG line to another device, ensure that the design of the system/connection does not produce a ground loop.
  • Page 57 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Grounding I/O Signal Lines DANGER EXPLOSION HAZARD Always confirm the ANSI/ISA 12.12.01 and CSA C22.2 N213 hazardous  location rating of your device before installing or using it in a hazardous location.

  • Page 58: Connecting The Dc Power Cord

    Industrial Personal Computer Connections Connecting the DC Power Cord Precaution When connecting the power cord to the power connector on the Industrial Personal Computer, first ensure that the power cord is disconnected from the DC power supply. DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH Remove all power from the device before removing any covers or elements of ...
  • Page 59 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Wiring and Connecting the Terminal Block The table below describes how to connect the power cord to the DC Industrial Personal Computer: Step Action Remove all power from the Industrial Personal Computer and confirm that the DC power supply has been disconnected from its power source.
  • Page 60 Industrial Personal Computer Connections Possible Connections Connection to a Ground-Referenced DC Power System: Industrial Personal Computer : Main Power Contact KM : Line contacts : Residual Current Detector for detecting grounding faults...

  • Page 61: Industrial Personal Computer Interface Connections

    PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Industrial Personal Computer Interface Connections Introduction The information below describes usage of the interface connections of the Industrial Personal Computer in Class I, Division 2 Groups A, B, C, and D hazardous locations.
  • Page 62 Industrial Personal Computer Connections The following figure shows the USB cable wiring: Notes: 1. The following table gives the Non-incendive Circuit Parameters: Circuit Parameters USB port 1 USB port 2 USB port 3 Open-circuit voltage = V 5.107 V 5.119 V 5.107 V Short-circuit current = I 1029 mA...

  • Page 63: Chapter 7 Configuration Of The Bios

    PS-4700 Series (Atom Z510 Pre-installed Model) User Manual DANGER EXPLOSION HAZARD Substitution of components may impair suitability for Class I, Division 2.  Do not energize or disconnect the device while area is known to be hazardous.  The associated non-incendive field wiring apparatus shall not be connected in ...

  • Page 64: Bios Options

    Industrial Personal Computer Connections CAUTION LOSS OF POWER Ensure that communication connections do not place excessive stress on the  communication ports of the Industrial Personal Computer. Securely attach communication cables to the panel or cabinet.  Use only D-Sub 9 pin cables with a locking system in good condition. ...
  • Page 65 Magelis Industrial Personal Computer Hardware Modifications EIO0000000970 07/2011 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Configuration of the BIOS What’s in this Chapter? This chapter contains the following topics: Topic Page BIOS Options Main Menu Advanced Menu - USB Configuration...

  • Page 66: Bios Options

    BIOS stands for “Basic Input Output System”. It is the most basic communication between the user and the hardware. The BIOS used in the Industrial Personal Computer is produced by Pro-face. The BIOS Setup Utility lets you modify basic system configuration settings. These settings are stored in CMOS and in an EEPROM (as a backup).
  • Page 67 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual BIOS Setup Keys The following keys are enabled during the POST: Function Enters the BIOS setup menu Displays the boot menu. Lists all bootable devices that are connected to the system. Use the up cursor  and down cursor  and then press the [Enter] key to select the boot device.

  • Page 68: Main Menu

    Configuration of the BIOS Main Menu Main Menu Immediately after the [F2] key is pressed during startup, the Main BIOS setup menu appears: The following table shows the Main menu setting options: BIOS Setting Description Setting Options Effect InsideH2O Version Displays the BIOS InsideH2O version. None Processor Type Displays the processor type.

  • Page 69: Advanced Menu - Usb Configuration

    PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Advanced Menu - USB Configuration Advanced Menu BIOS Setting Description Setting Options Effect Boot Configuration Configures the boot Enter Opens submenu settings. Peripheral Configures the peripheral Enter Opens submenu Configuration settings. IDE Configuration...
  • Page 70 No responsibility is assumed by Pro-face for any consequences arising out of the use of this feature.
  • Page 71 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual USB Configuration Submenu The following table gives the USB configuration setting options: BIOS Setting Description Setting Options Effect USB Legacy You can enable/disable Legacy USB Enabled Enables this function. support here. USB ports do not function...

  • Page 72: Boot Menu

    Configuration of the BIOS Boot Menu Boot Menu The following table gives the boot menu settings option: Boot Setting Description Setting Options Effect Quick Boot This function reduces the boot time Enabled Enables this function. by skipping some POST tests. Disabled Disables this function.

  • Page 73: Security Menu

    PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Security Menu Security Menu The following table shows the Security menu setting options: BIOS Setting Description Setting Options Effect Supervisor Displays whether or not a None Password supervisor password has been set.

  • Page 74: Exit Menu

    Configuration of the BIOS Exit Menu Exit Menu The following table gives the Exit menu setting options: BIOS Setting Description Setting Options Effect Exit saving changes Close BIOS setup with this item. OK / Cancel – Changes made are saved in CMOS after confirmation, and the system is rebooted.
  • Page 75 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual BIOS Default Settings If the function load setup defaults is chosen in the Main BIOS setup menu, or if exit is selected (or [F9] is pressed) in the individual setup screens, the default BIOS...
  • Page 76 Configuration of the BIOS...

  • Page 77: Chapter 8 Hardware Modifications

    Subject of this Chapter This chapter is about the hardware modifications for the Industrial Personal Computer. You can use optional units, Main Memory and CF Cards manufactured by Pro-face, as well as commercial devices and boards with this product. What’s in this Chapter?

  • Page 78: Before Modifications

    Hardware Modifications Before Modifications Overview DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH Remove all power from the device before removing any covers or elements of  the system, and prior to installing or removing any accessories, hardware, or cables.
  • Page 79 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual CAUTION OVERTORQUE AND LOOSE HARDWARE Do not exert more than 0.5 N•m (4.5 lb-in) of torque when tightening the  installation fastener, enclosure, accessory, or terminal block screws. Tightening the screws with excessive force can damage the plastic casing of the Industrial Personal Computer.

  • Page 80: Compact Flash (Cf) Card Installation And Removal

    COMPACT FLASH CARD DAMAGE AND DATA LOSS Remove all power before making any contact with an installed CF Card.  Use only CF Cards manufactured by Pro-face. The performance of the  Industrial Personal Computer has not been tested using CF Cards from other manufacturers.
  • Page 81 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Removing the CF Card The procedure below describes how to remove the CF Card. Step Action Shut down Windows® in an orderly fashion and remove all power from the device. Push the eject button to the left.
  • Page 82 Hardware Modifications USB Cable Attachment Introduction When using a USB device, attaching the USB cable with the Industrial Personal Computer’s cable clamp (located on the rear side) prevents the USB device from disconnecting. DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH Read and understand the safety information in Before modifications (see page 78) before attempting this procedure.
  • Page 83 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Step Action Untighten the cable clamp: Connect the USB cable to the USB connector: NOTE: When using two USB ports, be sure to first connect one USB cable to the lower ...
  • Page 84 Hardware Modifications...

  • Page 85: Part Iii Installation

    Magelis Industrial Personal Computer Installation EIO0000000970 07/2011 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Installation Subject of this Part This part describes the product installation. What’s in this Part? This part contains the following chapters: Chapter Chapter Name Page...
  • Page 86 Installation...

  • Page 87: Chapter 9 System Monitor

    Magelis Industrial Personal Computer System Monitor EIO0000000970 07/2011 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual System Monitor Subject of this Chapter This chapter describes the system monitor features of the Industrial Personal Computer. What’s in this Chapter? This chapter contains the following topics:...

  • Page 88: System Monitor Interface

    System Monitor System Monitor Interface Overview The System Monitor software enables you to monitor the following system parameters: Temperature  SMART  Depending on the configuration (see page 92), if thresholds are exceeded the System Monitor Software alerts via a popup message (see page 91), sound, buzzer and an entry in the windows event log.
  • Page 89 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Icon specific tab (Refer to the table below). Item name and status Minimize the System Monitor to the system tray. Resets alarmed item. Disable buzzer and sound. Only active when sound or buzzer is playing.
  • Page 90 System Monitor Temperature Status The following figure shows the Temperature tab: The following table describes the status messages of temperature parameters: Status Meaning Pass No alarm detected Error Alarm (limit exceeded) Disabled No alarm monitoring Service is not running SMART Status The SMART status monitors the hard disk.
  • Page 91 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual The following table describes the status message of the Industrial Personal Computer drives: Status Meaning O.K. No alarm detected Alert Failure reported by SMART or disk life-time reached Disabled No alarm monitoring...

  • Page 92: System Monitor Setting

    System Monitor System Monitor Setting Overview You can set the System Monitor parameters and specify the type of alarm in the System Monitor applet in the Windows Control Panel. Each system parameter has its own tab. Use the following dialog box tabs to display the monitoring parameters and setup the various elements to monitor.
  • Page 93 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual SMART - System Monitor Properties The screenshot below shows the SMART tab: Field Description Monitor the function of the Select this check box to enable and begin monitoring the built-in hard disks built-in hard disks.
  • Page 94 System Monitor...

  • Page 95: Chapter 10 Maintenance

    Magelis Industrial Personal Computer Maintenance EIO0000000970 07/2011 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Maintenance Subject of this Chapter This chapter covers maintenance of the Industrial Personal Computer. What’s in this Chapter? This chapter contains the following topics: Topic...

  • Page 96: Reinstallation Procedure

    Maintenance Reinstallation Procedure Introduction In certain cases, it may be necessary to reinstall the operating system. Precautions to be taken: Keep static-producing materials (plastic, upholstery, carpeting) out of the  immediate work area. Do not remove ESD-sensitive components from their anti-static bags until you are ...

  • Page 97: Regular Cleaning And Maintenance

    PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Regular Cleaning and Maintenance Introduction Inspect the Industrial Personal Computer periodically to determine its general condition. For example: Are all power cords and cables connected properly? Have any become loose?  Are all installation fasteners holding the unit securely? ...
  • Page 98 Maintenance During operation, surface temperatures of the rear metal housing may reach 70 C (158 F). WARNING RISK OF BURN Do not touch the surface of the rear metal housing during operation. Failure to follow these instructions can result in death, serious injury, or equipment damage.
  • Page 99 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual DANGER EXPLOSION, FIRE, OR CHEMICAL HAZARD Replace lithium battery with identical type.  Follow all lithium battery manufacturer’s instructions.  Do not recharge, disassemble, heat above 100 C (212 F), or incinerate.
  • Page 100 Maintenance Step Action 5 Insert the new lithium battery with correct polarity: 6 To make the next lithium battery change easier, be sure the removal strip is in place when inserting lithium battery. 7 Reconnect the power supply to the Industrial Personal Computer (plug in power cable and press power button).

  • Page 101: Appendices

    Appendices EIO0000000856 11/2010 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Appendices What’s in this Part? This part contains the following chapters: Chapter Chapter Name Page Accessories After-sales service...
  • Page 102 Appendices...

  • Page 103: Chapter 11 Accessories

    Accessories EIO0000000856 11/2010 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual Accessories Accessories for the Industrial Personal Computer Available Accessories Accessories are available as options. The list of accessories available for the Industrial Personal Computer is shown below: Description Reference...
  • Page 104 Accessories...

  • Page 105: Chapter 12 After-Sales Service

    Accessories EIO0000000856 11/2010 PS-4700 Series (Atom Z510 Pre-installed Model) User Manual After-sales service For details on after-sales service, refer to Pro-face website at http://www.pro-face.com/trans/en/manual/1001.html...
  • Page 106 After-sales service...

Table of Contents