Pro-face PS-3600G Series User Manual page 108

(10) Return the circuit board chassis to the original position.
(11) Return the rear face caver to the original position, and secure the cover in place using the mounting
screws (7). The necessary torque is 5.3N•m.
• The cable clamp is used to prevent the cable from being caught inside in the PS-G
unit and possibly damaged. Be sure to insert the cable in the cable clamp around
the cable before replacing the rear cover.
• If any of the screws is missing, check if it fell inside the PS-G unit's chassis. If the
power is turned ON while a screw is inside, it may cause an accident or fire.
• After backlight replacement is completed, turn the PS-G unit's power ON and check if the
screen's display is normal. If the display is not correct, please contact the Pro-face distributor
from whom you purchased the backlight unit.
Chapter 7 Maintenance
7-9