PS-3600G Series User Manual
3.3.3
USB Holder Attachment/Removal
When using a USB device, attaching the USB holder to the USB Host Interface located on the side of the PS-
G unit prevents the USB cable from becoming disconnected.
Attachment
(1) Attach the USB holder to the USB Host Interface part of the main unit.
Hook the upper pick of the USB holder to the attachment hole of the main unit and then insert the lower
pick as shown below to fix the USB holder.
(2) Insert the USB cable into the USB Host Interface.
(3) Attach the USB cover to fix the USB cable. Insert the USB cover into the tab of the USB holder.
In case of installing the second USB cable, repeat the steps (2) and (3).
Removal
(1) Lift up the tab of the USB holder and then remove the USB cover as shown below.
(2) After removing the USB cable, remove the picks pushing the USB holder from both top and bottom.
3-16
USB Cable
USB Holder
Tab
USB Cover
USB Holder
Tab
USB Cover