Table of Contents
Advertisement
4.4.5
Network
When connecting your PS-G unit to a network via an Ethernet cable, the following settings are required.
Network Setting Procedure
(1) Double click the [Network and Dial-up Connections] icon on the Control Panel.
(2) Double click the [LAN90001] icon.
(3) Set the IP address and Name Server on the panel in accordance with your network environment.
• For details about these settings, please contact your network administrator.
4.4.6
Volume & Sounds
This setting either enables or disables the buzzer sound used when the screen is touched. The factory setting is
for the buzzer to be enabled (Checkbox ON).
Volume & Sounds Setting Procedure
(1) Double click the [Volume & Sounds] icon on the Control Panel.
(2) Select the [Volume] tab. Next, set the [Enable Buzzer for screen taps] to either ON or OFF.
Chapter 4 About Windows CE
4-11
Advertisement
Table of Contents
