Cf Card Interface; Gp077-Mlte41)); Peripheral Units And Option Units; Barcode Reader Connection - Pro-face GP-577R Series Replacement Manualbook

2.5.3 CF Card Interface

(only when using "Multi Unit" (GP077-MLTS11, GP077-MLTE41))
GP-4501T/TW is not equipped with a CF card slot. But a SD card slot and a USB
interface are installed. In order to use the GP-577RT/S data saved in the CF card
and the functions using the CF card with using Multi Unit (GP077-MLTS11,
GP077-MLTE41), use a SD card or a USB flash drive instead.
* When using a SD card with GP-4501T/TW, please verify it supports the following
specifications:
SD
SDHC
For the GP-PRO/PBIII's "CF Card output folder" setting, if project file is converted
on GP-Pro EX, the setting will automatically change to the one that uses a SD card.
To change the setting of the output destination folder, see
setting of the external media to
(The sound output function of the Multi Unit (GP077-MLTS11, GP077-MLTE41)
cannot be used for GP-4501T/TW.)

2.6 Peripheral units and option units

2.6.1 Barcode reader connection

GP-4501T/TW is not equipped with a tool port. A barcode reader that used to be
connected to the tool port on GP-577RT/S cannot be used. However, GP-4501T/TW
allows you to connect a barcode reader on its USB interface (Type A) or its serial
interface.
For the models GP-4501T/TW supports, see [OtasukePro!]
(http://www.pro-face.com/otasuke/qa/3000/0056_connect_e.html).
File format
FAT16
FAT32
use].
14/48
Maximum capacity
2GB
32GB
[5.1 Changing the