Pro-face PS-3600G Series User Manual page 43

PS-3600G Series User Manual
Wiring
When connecting the Power Cord, use the following items when performing wiring. (Items are made by
Phoenix Contact.) *
Connecting the Power Cord
When connecting the DC type power cord, be sure to follow the procedures given below.
(1) Confirm that the power cord is unplugged from the power supply.
(2) Loosen the three screws in the center of the Power Plug.
(3) Strip the membrane of the power cord, twist the wire ends, and connect them to the Power Plug.
(4) Fix it with screws.
* For details, please contact your local Phoenix Contact distributor.
3-10
Recommended Driver
Recommended Pin
Terminals
Recommended Pin
Terminal Crimp Tool
• The torque required to tighten these screws is 0.5 to 0.6N•m.
• Do not solder the cable connection.
SZF 1-0.6x3.5 (1204517)
AI 0.25-6BU (3201291)
AI 0.34-8TQ (3200865)
AI 0.5-8WH (3200014)
AI 0.75-8GY (3200519)
AI 1-8RD (3200030)
AI 1.5-8BK (3200043)
AI 2.5-8BU (3200522)
CRIMPFOX ZA3 (1201882)
+
-
FG