Pro-face PS-3600G Series User Manual page 81

PS-3600G Series User Manual
(10) After the session is established, the following massage is going to be displayed.
Select the [Yes] or [No] on the [Set Up a Partnership] display panel.If you select [No], set for the con-
nection settings only once as a guest. If you select the [Yes] the unit saves the connecting information.
After next session, the unit can establish a session with the Ethernet cable only.
SEE 5.3.3 Connection Procedure Using the Ethernet Cable Only (page5-13)
• Once connected, ActiveSync resides in the personal computer, and its connection setting is going
to be kept. It will be possible to establish subsequent connections by just starting up
"repllog.exe" until the PS-G unit is turned OFF. By saving the [PC Connection] setting by
selecting Save Registry before turning OFF the PS-G unit, connections can also be established
by just starting up "repllog.exe" even after the PS-G unit is restarted.
• To download data using an Ethernet network, connect an Ethernet cable as well as the serial
cable.
5-12