Table of Contents
Advertisement
Introduction
This document provides technical information for assisting Christie qualified technicians in the servicing
of the Christie DHD410S projection systems.
Every effort has been made to make sure the information in this document is accurate and
complete. However, due to continuing research all information is subject to change without notice.
Christie assumes no responsibility for omissions or inaccuracies.
Affected products
The following products are affected:
•
Christie DHD410S
Site requirements
Do not use the projector under the following conditions:
•
In extremely hot, cold, or humid environments.
•
In areas susceptible to excessive dust and dirt.
•
Near any product generating a strong magnetic field.
•
In direct sunlight.
Power connection
The projector uses a universal AC power system that allows the projector to operate at full
brightness with a 100-240 VAC power supply. Operating the device outside of this voltage range
may cause unsatisfactory operation or damage to the projector. To ensure safety operation, only
use the AC power cord provided with the product or recommended by Christie.
Projector components
Identify the main components of the projector.
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
7
Advertisement
Table of Contents
