Christie DHD410S Service Manual page 63

See Replacing the main board
3. Remove the combiner module.
See Replacing the combiner module
4. Remove the color wheel.
See Replacing the color wheel
5. Remove three screws securing the focus ring cover.
6. Remove two screws securing the focus ring.
7. Cut off one cable tie.
8. Remove four screws, and then take out the engine module.
9. Remove the light engine.
10. Remove the DMD board.
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
on page 77.
on page 73.
on page 70.
Optics
63