Christie DHD410S Service Manual page 69

2. To remove the main board top shielding, remove the eight screws with a Phillips #1
screwdriver.
3. Remove three screws with a Phillips #1 screwdriver securing I/O shielding.
4. On the top side of the main board, disconnect the 13 connectors, indicated by the labels (A-M)
in the image below.
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
B C D
A
Printed circuit boards and sensors
E F G H I J
K L M
69