Projector Setting; Setup Touchdriver Procedure; Ir Camera Calibration - Christie DHD410S Service Manual

Projector Setting

1. Power on projector.
2. Connect the PC and Projector by mini USB Cable.
3. Connect the PC and Projector by VGA Cable.

Setup TouchDriver Procedure

Please download "LCTv.1.6.3.exe" first.
1. Double click LCTv.1.6.3.exe to install the application.
2. After install the application, a USB driver need to install, click Install from a list or specific
location (Advanced)".
3. Click Don't search. I will choose the driver to install to install the USB driver.

IR camera calibration

• For IR camera test need the special pen:75.73901G001
• If use the XP system, install"Microsoft.NET" first
1. On the PC, click LCT.
2. Select Pen Mode in Operation Mode.
3. Select Auto in Calibration.
4. When the process is complete, click OK.
5. Please touch the target marks on the screen. (If you would like exit calibration process, please
use the "ESC" key) After the 9th point of calibration is finished, please wait for 2 seconds while
calibration data is saved, then touch is ready for use.
•
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
If the "auto Calibration still failed" message appears on screen, please change
to manual calibration mode.
Service setups
24