Performing A Rs232 Port Function Test; Rs232 Port Setting; Rs232 Signals Connection; Performing A Ir Camera Function Test - Christie DHD410S Service Manual

Performing a RS232 port function test

RS232 port setting

Items
Communication Method
Bits per seconds
Data bits
Parity
Stop bits
Flow control

RS232 signals connection

RS232 shell is grounded.
To perform the RS232 and video function test, complete the following steps.
1. Connect the projector and PC by RS232 cable.
2. Set the PC Baud Rate to 19200.
3. Input the RS232 command (PWR 1).
The projector returns the following (P).

Performing a IR Camera function test

DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
Method
Asynchronous Communication
19200
8 bits
None
1
None
Service setups
23